Thursday, June 28, 2012

Set 447

For first time visitors I recommend this archive for some of my best posts.






2593. Approximately 7" square:

Larger image

























2594. 10" long:

Larger image



















2595. This desk was used for a particular purpose:

Larger image




Larger image
















2596. 5-1/8 long, take a look at Neatorama for more guesses and a chance to win a T-shirt:

Larger image



Larger image

























2597. About 6" long, sent in by a visitor who is looking to identify this device, their description of it: "It looks like some sort of latching mechanism, currently in the latched position. When the lever is switched it looks like the rounded hole will line up with the two fixed ones."

Larger image

























2598. Around 12" long:




















Answers:


2593. This is a "Tile Holding Tool for Use in Tile Cutting" specifically for when making a hole in tile, patent number 2,842,115:

Larger image

























2594. This is a scribe for use when making a log cabin:

Larger image



















2595. This desk was used in a post office in Virginia:

Larger image




Larger image
















2596. A chainsaw bumper spike, or dog bumper, the quote below on how it's used is from this site.

"Then place the bumper spikes near the engine firmly against the trunk, and start cutting. Pivot the saw about the bumper spikes and into the trunk, using a fanlike motion and moderate pressure to feed the chain into the wood. It is not necessary to move the saw in a sawing motion: the powered chain provides the cutting action. Pivot the saw, then move the bumper spikes to a new location and continue feeding the chain into the cut. Draw the saw out of the cut slowly and with the chain running. If you must cut without the bumper spikes in contact with the tree, or if the saw does not have spikes, be careful that the saw does not jerk and throw you offbalance when the chain contacts the bark or wood."

Larger image

The tool in this video is missing the saw but you can see where the spikes are mounted.




Larger image

























2597. No luck yet on this device, the most suggested answer is that it's a latch for an old window or wagon from the 1800s.

Larger image

























2598. This is an overhead trolley switch as seen in this photo from a trolley museum.














Are you interested in Old Tools and Tool Collecting? Want to learn more about tools, and meet some great people who have the same interests? Please take a minute to check out the Mid-West Tool Collectors Web Site at this link: www.mwtca.org.































To submit photos, send them to the address in my profile, please include dimensions, any text on the item, and where it was found.




















Last week's set is seen below, click here to view the entire post.








More discussion and comments on these photos can be found at the newsgroup rec.puzzles.

7 comments:

  1. 2598 looks like a frog or common crossing of a feldbahn or mine railway system?
    B.

    ReplyDelete
    Replies
    1. This comment has been removed by the author.

      Delete
  2. 2596- Part of a chainsaw- prevents the saw from slipping while bucking logs.

    2598 Agree with above: switch frog for some kind of small rail system.

    ReplyDelete
  3. 2598 - Frog casting for overhead trolley wire.

    ReplyDelete